MPDPlastic@aol.com
Phone: 719-487-7373
or 1-800-FLEX-FILMS
Fax: 719-487-7368

P.O. Box 488
Palmer Lake, CO 80133

 

INHIBITORS & BARRIERS
NOTE: To the best of our knowledge the following are typical property values and are intended as guides only, not as specification limits.

09VL WHITE/GRAY FR
Metal Building

Vapor Barrier

09VL WHITE/GRAY FR is made from 2 layers of specially formulated UV stabilized, flame retardant, high density polyethylene, reinforced with polyester tire cord. 09VL WHITE/GRAY FR - the "rip stop" string reinforced poly - was developed to meet the specifications that require a heavier, stronger and more efficient AIR/VAPOR barrier for metal buildings. 09VL0-FR has a Flame Spread Index less than 25 and a Smoke Developed Value less than 50.

PHYSICAL PROPERTIES

Weight/MSF 24 lbs.
Color white/gray
Thickness 5 mil nominal
Elongation 337%
Grab Tensile 53.7 lbs.
Trapezoid Tear 44 lbs.
Mullen Burst Strength 70 lbs.
Hydrostatic Bursting Point 39 PSI
Use Temperature -70 F to +180 F
Perm Rating 0.0507 U.S. Perms
Stock Sizes (widths) 20’6", 25’6", 31’6"

CROSS-TUFF BLACK/WHITE
Poultry House Vapor Barrier

  • Bright White/Black color combination gives an appealing neat & clean appearance. Does not reveal gaps in the insulation.
  • UV and thermal stabilized with anti-oxidants for long life.
  • Available in layflat widths up to 14’ and lengths up to 525’ for easy, low cost installation, Cross Tuff can also be made in folded widths up to 60’ wide.
  • Cross lamination works. Cross laminated, high density poly has a grain like plywood. We cross these grains making an extra strong, light weight vapor barrier that will not sag and will stand up to high pressure cleaning.
  • Proven - - cross laminated poly has been used in the poultry industry for over 25 years.

TUFF WEAVE 5 BLACK/WHITE
Poultry House Ceiling Fabric

PHYSICAL PROPERTIES
Grab Tensile (warp) 98 lbs.
Grab Tensile (weft) 78 lbs.
Toungue Tear (warp) 27 lbs.
Toungue Tear (weft) 20 lbs.
Trapezoid Tear (warp) 118 lbs.
Trapezoid Tear (weft) 41 lbs.
Hydrostatic Bursting Point 78 PSI
Mullen Burst 173 PSI
Use Temperature +200 to -70F
Weight / msf 24 lbs.
Nominal Thickness 6.5 mil
Ribbon Count 7 x 4

Coating

2 mil ultra white/1.25 mil black


09VL SYNTHETIC CURE
Synthetic Concrete Curing Covers

When the job requires a wet cure, insist on 09VL Synthetic Cure.

  • Lighter weight - Synthetic Cure is 30% lighter than standard burlap covers
  • Lasts longer - White UV stabilized reinforced poly "skin" makes Synthetic Cure stronger and last longer
  • Holds more water - Synthetic Cure holds 30% more water than burlap
  • Will not stain - Synthetic Cure will not stain concrete like burlap
PHYSICAL PROPERTIES
Weight/MSF 60 lbs.
Color White
Stock Sizes 6' x 100'
12' x 100'

09VL SYNTHETIC CURE meets or exceeds the requirements of AASHTO M 171 and ASTM C 171-69 for moisture retention standards. ASTM E 97 light reflectance not less than 70%.


09VL 10 HUV

ULTRAVIOLET STABILIZED
STRING REINFORCED POLYETHYLENE

09VL 10 HUV is made from 2 layers of specially formulated UV stabilized high density polyethylene and reinforced with polyester tire cord.

09VL10 HUV - - the "rip stop" string reinforced poly was developed to meet the specifications that require a heavier and stronger film for:

  • outdoor storage covers
  • cargo covers
  • temporary erosion control
  • vapor barrier
  • divider curtain
  • building enclosures

Insist on 09VL 10 HUV, the
only 10 mil "rip stop"
reinforced poly sheeting.

PHYSICAL PROPERTIES
Weight/MSF 55 lbs.
Color Clear
Thickness 10 mil nominal
Elongation 650%
Grab Tensile 82 lbs.
Trapezoid Tear 62 lbs.
Hydrostatic Bursting Point 80 PSI
Perm Rating 0.0418 U.S. Perms


CROSS-TUFF
Cross Laminated

High Density Poly

Insist on the only cross laminated high density poly. The strong protective wrapping performer in all weather conditions.

Pit Liners &
Underslab Vapor Barrier

Industrial and Specialized
Packaging Applications
  • Tensile strength 8,000 lbs per square inch
  • Immeasurable impact strength
  • Moisture transmission rates low
  • Excellent energy saver as radiant barrier
  • Outstanding resistance to tears, snags and punctures
  • Pin hole free
  • Flame retardent version available
  • Resistant to most chemicals and ultraviolet degradation
  • Cold crack resistance of 70 degrees below zero
  • Won't run, peel or shatter
  • Will not support fungus growth, mildew or rot
  • Will not crack on folds or creases
  • Lightweight
  • Standard and custom measurements

CROSS-TUFF is made in the U.S.A .by Van Leer for Manufactured Plastics


MICRO-WRAP

  • UV & thermal aging stabilized
  • Strong...tensile strength
  • "J" folded for easy installation
  • Reduces air infiltration
  • Light weight - only 25 lbs. per roll
  • Packaged for UPS shipping and easy warehousing
  • Contact clarity makes siding installation easier

Micro-Wrap is an extremely strong film that has a high permeability for allowing exterior walls to breathe water vapor. At the same time, it prevents cold air from penetrating the wall cavity and keeps warm air in the living area. Micro-Wrap helps to reduce heat loss through exterior walls. By reducing the air movement through the walls, Micro-Wrap preserves the R-value of insulation so you get maximum efficiency and savings. Micro-Wrap passes moisture vapor so it won’t cause in-wall condensation. Micro-Wrap allows you to increase the value of your homes by making them more energy efficient — an important feature for home buyers.


CROSS-TUFF FOAM
Condensation Inhibitor

Cross-Tuff Foam (CTF) is made from specially formulated UV and thermal stabilized polyethylene and reinforced with 1000 denier polyester cord, laminated to one eighth inch closed cell polyethylene foam.

CTF roll size of 72" + X 500' is easy to handle and reduces job site waste.

The "rip stop" string reinforcing makes CTF the TUFFest condensation inhibitor available.

PHYSICAL PROPERTIES
Weight/MSF 35 lbs.
Color White
Grab Tensile 48 lbs.
1" Tensile 32 lbs.
Elongation (grab) 290%
Trapezoid Tear 29 lbs.
Hydrostatic Bursting Point 58 PSI
Perm Rating 0.048 U.S. Perms
Weight 35 lbs / msf
Roll Sizes 6' x 1500'
6' x 500'
6' x 100'

MPD MOISTURE BARRIER
REINFORCED POLY COATED PAPER

MPD MOISTURE BARRIER is the new generation underslab vapor barrier. We’ve laminated a coated, high density, woven polyethylene fabric to high strength kraft paper. Each side is protected with UV stabilized polyethylene.

MPD MOISTURE BARRIER has excellent tear, puncture and abrasion resistance, PLUS the advantage of "rip stop" woven polyethylene reinforcing.

MPD MOISTURE BARRIER meets Federal Specifications UUB-790a, Type A, Style 4 and is covered by ASTM E-154. Meets FHA and VA minimum property standards for use in crawl spaces and under concrete slabs.

PHYSICAL PROPERTIES
Weight/MSF 50 lbs.
Color Black
Thickness 13 mils nominal
Grab Tensile (warp) 142 lbs.
Grab Tensile (weft) 115 lbs.
Tear Strength 36 lbs.
Vapor Permeance 0.10 perms
Water Resistance 72 hours
Beach Puncture Resistance 140 beach units

 


HOME | LINE CARD | DISASTER RELIEF | STRING REINFORCED POLY FILMS | THICK MIL POLY FILMS | FLAME RETARDANT POLY FILMS | BUILDING ENCLOSURE FILMS | PIPE WRAP

Copyright © 2006 Manufactured Plastics and Distribution Inc.